WPS configurations for Asus RP-N12 wifi repeater
To setup WPS configurations for the Asus
RP-N12 wifi repeater, there are two methods to be followed which are as under
described.
For method one here are steps which you
have to follow for configuration for Asus.
1. Place your RP-N12 near to router you
have and plug it to a power outlet. Make sure the wifi led light starts with
blinking in green color.usb printer issue for asus device.
2. Press the WPS button which is on the
router/AP. Then you have to press the button which is on RPN12. The wifi led
light indicated the signal is strong if it flashes up to two minutes and
changed in solid green or in red light.
3. Place the RPN-12 in an ideal location or
where you want to use it. It takes to connect with your wifi about one to two
minutes.
Make sure that you have placed the RPN-12
device in between the wireless device and the router and place the RPN12 in a
location where you get the green led which means the signal is strong enough.
Second method setup with using the browser.
1. Plug into the power outlet to your
RP-N12 after placing it to the near router you have.
2. On your wifi enabled the device to find
the default network name of your RPN12 and click on the connect tab. Make sure
to disconnect the Ethernet wire connection. Open the web browser and enter the
address HTTP//repeater.Asus.comto access the graphical user interface
of the RPN12. Here you have to enter the admin as user name and password.
3. Enter HTTP //repeater.Asus.com on the web browser. Enter the security key
when required after connecting to the wifi network. Here you can enter the SSID
key/password for your extended network or you can tick on the use defaulter
key.
4. Here you have to connect your
wireless network to the new extender work.
Comments
Post a Comment